Ok, so I know that this post isn't related to homebrewing, but I came up with the idea because of homebrewing so I figured I'd share.
A few years ago while putting up some baseboards I put a nail right through a water line (which homebuilder had WAY to close to dry wall) and I had water shooting into my bathroom. Calling a plumber on a Sunday wasn't cheap. Since then, I've been a little gun shy about putting nails in the wall where I suspect pipes may be. Well I just replaced all the floors in my house so I also had to replace all the baseboards. I debated going out and buying a stud finder but I didn't want to spend the money.
I then had the idea that maybe I could just use a magnet to find the nails in the studs. The stronger the magnet the better. Then the light bulb when off. I had the earth magnets that I took out of hard drives to build stir plates (yes, here is the homebrew connection). They worked perfect. I'd pass them over the wall and the magnets would have a strong pull to the nails in the drywall and just hang there.
So if you got an old harddrive laying around, take out the earth magents and you'd have yourself a free stud finder.
Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts
Sunday, September 9, 2012
Saturday, March 24, 2012
Hop Spider
Sometimes I wonder why I started brewing when I look at how crazy I am with having to be exact with almost everything. One of the things I'm trying to work on now is knowing exactly how much water I need to use to mash, sparge, trub waste, absorption, evaportation, shrinkage, etc to get exactly 5 gallons in my fermenter. I've build a spreadsheet to track each brew day so I can refine the process. I know I'm not a pro brewer and I should maybe chill out a little, but I love to keep stats and to perfect a process.
Another part about accounting for hop matter is that I harvest my yeast to save money. If hop matter gets into the fermenter then there is likely hop matter in the yeast cake. The more "junk" in the yeast cake......blah blah blah.
So as part of my wanting to nail my water volume as well as having a cleaner yeast cake, I want to limit the amount of hop matter that makes it into the fermenter. I have been straining and trying leaving trub behind, but I need to account for that water lose and I'm still getting some hop material.
To take care of the hops, I've decided to build a Hop Spider. I take zero credit for the idea or the build. I saw an article in the December 2011 issues of BYO written by John Brooke. I'm not going to repeat any of the process because you can get the article online. Click here for the article on BYO.COM.
I'm using it for the first time tomorrow. Hopefully it works!
Another part about accounting for hop matter is that I harvest my yeast to save money. If hop matter gets into the fermenter then there is likely hop matter in the yeast cake. The more "junk" in the yeast cake......blah blah blah.
So as part of my wanting to nail my water volume as well as having a cleaner yeast cake, I want to limit the amount of hop matter that makes it into the fermenter. I have been straining and trying leaving trub behind, but I need to account for that water lose and I'm still getting some hop material.
To take care of the hops, I've decided to build a Hop Spider. I take zero credit for the idea or the build. I saw an article in the December 2011 issues of BYO written by John Brooke. I'm not going to repeat any of the process because you can get the article online. Click here for the article on BYO.COM.
I'm using it for the first time tomorrow. Hopefully it works!
Sunday, June 12, 2011
Ranco ETC-111000 Wiring
A few weeks back I was able to score a chest freezer off Craiglist for $25. Less than 10 years old, works fine and the previous owner just had no use for it and wanted it out of the way. Even though I have a Haier Kegerator, it only houses 2 kegs (had to convert it from one, http://fourleafbrewing.blogspot.com/2011/03/kegerator-upgrade.html) and I'd like to be able to have at least 4-5 beers on tap. When I convert this chest freezer, that will allow me to do so.
However, you can't just put kegs in the freezer, they will freeze....duh! So you need a way to override the thermostat. That is where a temperature controller comes in. I decided to go with a Ranco ETC-111000, unwired. I bought one on Ebay for under $50. Now it was time to wire it.
I will save you all the details of the wiring in my blog cause someone else has already done an excellent job.
http://www.susanminor.org/forums/showthread.php?644-Ranco-ETC-111000-000-120V-Wiring-Guide
The only thing that I did differently was I used a power strip vs. just a female end of an extention chord. Honestly, didn't have any great reason to do that way, just saw that is what others have done and I figured the extra protection of the strip couldn't hurt.
If you have basic electric skills (i.e. installing/changing outlets, putting up ceiling fans or lighting, etc) you'll be able to do this project. As always with electric, BE VERY CAREFUL and read all the directions fully before you try this. Sorry, but I can't be liable for any damages just because you got the idea from my blog and you do this project at your own risk.
I plan to have the chest freezer converted and a collar built in the next few weeks (got the collar idea/specs from BYO's winter issue). I'll post details of that project after I'm done.
However, you can't just put kegs in the freezer, they will freeze....duh! So you need a way to override the thermostat. That is where a temperature controller comes in. I decided to go with a Ranco ETC-111000, unwired. I bought one on Ebay for under $50. Now it was time to wire it.
I will save you all the details of the wiring in my blog cause someone else has already done an excellent job.
http://www.susanminor.org/forums/showthread.php?644-Ranco-ETC-111000-000-120V-Wiring-Guide
The only thing that I did differently was I used a power strip vs. just a female end of an extention chord. Honestly, didn't have any great reason to do that way, just saw that is what others have done and I figured the extra protection of the strip couldn't hurt.
I plan to have the chest freezer converted and a collar built in the next few weeks (got the collar idea/specs from BYO's winter issue). I'll post details of that project after I'm done.
Wednesday, March 30, 2011
Kegerator - Upgrade
As many homebrewers know, one tap isn't enough. So I converted the kegerator to have two taps. I tried several different ways to fit at least 3 kegs in the frig, but it just wasn't happening. Kind of a bummer. But two will do for now.
My father-in-law made some custom handles for me and I painted them with chalkboard paint so I could easily label each batch. Came out pretty sweet I think!
My father-in-law made some custom handles for me and I painted them with chalkboard paint so I could easily label each batch. Came out pretty sweet I think!
Monday, February 21, 2011
Kegerator
My co-worker gave me his Haier Kegerator. He said it wasn't running anymore. I took it because I figured I could at least take the CO2 gauge, faucet, shank and maybe craiglists the rest. I gave him a 12 pack of homebrew for it. Well I plugged it in and like he said, it wasn't working. However, I wasn't satisfied with that. When plugged it, there was a click, the compressor started and then it stopped a few seconds later. This continued over and over and over. I figured there had to be a cause for this.
So after a bunch of hours of research online, I believed that I found that the problem was the relay and overload switch. So I went to my local appliances parts place and picked up a new univeral relay/overload for $15.50. Got home, changed it out and ta da, a working kegerator!!
So for a 12 pack of homebrew and less than $16, I now own something that retails for $600+.
It shows that with the internet, if you are slightly handy, you can fix almost anything.
If you are having a similar issue that after you plug it in you just hear a click, the compressor starts and then stops a few seconds later its a good chance that it is the relay and overload switch. My Haier kegerator has an LG compressor (MA53LBCM) which has separate pieces for the relay and overload. But I purchased the Supco Relay/Overaload Combination (model R081) which is a single unit to replace the relay and overall (two separate pieces) on the frig. I used this website to make sure I had the wiring correct for my LG compressor www.lg.com/global/download/brochure/rec_comp_catalog.pdf If you do not have an LG compressor, look for your model online to get the specs and wiring.
So after a bunch of hours of research online, I believed that I found that the problem was the relay and overload switch. So I went to my local appliances parts place and picked up a new univeral relay/overload for $15.50. Got home, changed it out and ta da, a working kegerator!!
So for a 12 pack of homebrew and less than $16, I now own something that retails for $600+.
It shows that with the internet, if you are slightly handy, you can fix almost anything.
If you are having a similar issue that after you plug it in you just hear a click, the compressor starts and then stops a few seconds later its a good chance that it is the relay and overload switch. My Haier kegerator has an LG compressor (MA53LBCM) which has separate pieces for the relay and overload. But I purchased the Supco Relay/Overaload Combination (model R081) which is a single unit to replace the relay and overall (two separate pieces) on the frig. I used this website to make sure I had the wiring correct for my LG compressor www.lg.com/global/download/brochure/rec_comp_catalog.pdf If you do not have an LG compressor, look for your model online to get the specs and wiring.
Subscribe to:
Posts (Atom)

